KYDEX® 410

Proprietary ABS/PVC Sheet

Download

Introduction

KYDEX® 410 is a proprietary ABS/PVC thermoplastic sheet that offers superior thermoformability, rigidity, breakage resistance, chemical resistance and fire retardancy.

General
Information

KYDEX® 410 is available in a wide range of standard and custom colors, textures, and sheet sizes. It is Underwriters Laboratories, Inc® recognized for UL std 94 V-0, 5V (rating pending).

Suggested
Applications

  • Medical Equipment Housings
  • Electrical Equipment Housings
  • Mass Transit Interior Vehicle Components
  • Miscellaneous Applications

Flammability

  • FAR 25.853a
  • UL94 V-0, 5-V @ 1mm
  • Radiant Panel: RP25
  • FMVSS 302

Features

  • Good for deep or hard to form parts
  • More rigid, parts will deform less when loaded – or can be down-gauged for weight-savings
  • High Notched Izod impact resistance offers resistance to breakage
  • Meets highest standard for chemical resistance for thermoplastic materials
  • Passes UL Std 94 V-0 and 5V in all thicknesses and colors
  • Uniform wall thickness and crisp detail
  • Easy machining and fabricating using conventional methods and equipment
  • Low moisture absorption – no drying needed prior to thermoforming
  • Passes ball pressure test as per UL 60601-1
  • Good low temperature impact resistance

Environmental
& Safety
Considerations

SEKISUI KYDEX, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, disposed and recycled with an appropriate regard for safety, health, and environmental protection. We support the safe handling of our products.

Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.

Property Test Method Typical Value1
PHYSICAL PROPERTIES
Specific Gravity ASTM D-792 1.29
Tensile Strength ASTM D-638 53.84 MPa 7,800 psi
Notched Izod Impact Resistance, @ 22°C (72°F) ASTM D-256 801 J/m 15 ft-lbs/in
Notched Izod Impact Resistance, @ -20°C (-4°F) ASTM D-256 94 J/m 1.76 ft-lbs/in
Flexural Strength ASTM D-790 76.53 MPa 11,100 psi
Flexural Modulus ASTM D-790 2,537 MPa 368,000 psi
Heat Deflection Temperature (HDT)2
@ 264 psi (1.8 MPa) unannealed/annealed		 ASTM D-648 71.1-79.4°C 160/175°F
Ball Pressure Test UL 60601-1
Sub clause 59.2b		 Pass
Coefficient of Thermal Expansion ASTM E-831 8.3 x 10-5 mm/mm°C 4.6 x 10-5 in/in°F
Rockwell Hardness (R Scale) ASTM D-785 107
12 and 60 sec Vertical Burn FAR 25.853a Pass
Federal Motor Vehicle Safety Standard FMVSS 302 Pass
Flammability: Underwriter’s Laboratories, Inc®
Component Recognition		 UL Standard 944 V-0, 5V5
Mold Shrinkage 0.5 – 0.7%
Moisture Absorption: 24 hours @ 50°C3 ASTM D-570 0.07%
Thermoforming Range3 163 – 204°C 325 – 400°F
1 Values based upon 3.18mm (0.125”) sheet unless otherwise specified
2 Annealed at 65.5°C (150°F) for 8 hours and cooled slowly
3 After three months storage, drying may be required
4 Underwriter’s Laboratories, Inc®, File E115252
5 All thicknesses 1.0mm (0.039”) and above
Not intended for specification purposes.
This information supersedes all previously published data.