SMP800C compliant profile extrusion compound for mass transit applications
Introduction
KYDEX® P2200 is a high performance thermoplastic profile extrusion compound designed for use in mass transit interior applications where SMP800C or BSS7239 compliance is required.
General
Information
KYDEX® P2200 meets the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) requirements for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162. Additionally, KYDEX® P2200 meets the toxicity criteria defined by SMP800C and BSS7239.
Suggested
Applications
- Extruded trim pieces to cover seams or exposed edges when mating or joining KYDEX® thermoplastic components
Features
- Meets flame spread and smoke development requirements listed in 49 CFR 238
- Compliant to SMP800C and BSS7239 toxicity specifications
Environmental
& Safety
Considerations
SEKISUI KYDEX is committed to ensuring that its products can be manufactured, transported, stored, used, disposed and recycled with an appropriate regard for safety, health, and environmental protection. We support the safe handling of our products.
Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.32 | |
| Density | ASTM D792 | 1.30 g/cm3 | 0.048 lb/in3 |
| Water Absorption, 24 hr. | ASTM D570 | 0.10% | |
| Rockwell Hardness, R-scale | ASTM D785 | 96 | |
| Melt Flow Index 300°C / 2.16 kg | ASTM D1238 | 4.25 g/10 min. | |
| MECHANICAL | |||
| Tensile Strength | ASTM D-638 | 36.5 MPa | 5,300 psi |
| Tensile Modulus | ASTM D-638 | 3,654 MPa | 530,000 psi |
| Flexural Strength | ASTM D-790 | 70.3 MPa | 10,200 psi |
| Flexural Modulus | ASTM D-790 | 3,371 MPa | 489,000 psi |
| Gardner Drop Dart Impact, GE | ASTM D-5420 | 5.3 J | 47.2 in-lbf |
| Gardner Drop Dart Impact, GE @ -20°F (-29°C) | ASTM D-5420 | 3.1 J | 27.4 in-lbf |
| THERMAL | |||
| Heat Deflection Temperature (HDT) @ 264 psi (1.8 MPa) Annealed |
ASTM D648 | 77.8°C | 172.0°F |
| Coefficient of Thermal Expansion | ASTM E831 | 43.7 μm/m/°C | 24.3 μin/in/°F |
| ELECTRICAL | |||
| Dielectric Strength, oil | ASTM D149 | 1.3 kV/mm | 537 V/mil |
| FLAMMABILITY2 | |||
| Flammability: Flame Spread Index |
ASTM E-162 | Is <35 No Burning Drip |
|
| Flammability: Smoke Density |
ASTM E-662 | Ds(1.5) <100 Ds(4.0) <200 |
|
| Bombardier Toxic Gas Generation | SMP 800-C | Pass | |
| Boeing Toxic Gas Generation | BSS 7239 | Pass | |
| 1 Values based upon 3.18mm (0.125”) sheet unless otherwise specified. 2 All thicknesses and colours Not intended for specification purposes. | |||